BRMJ OVS / Black
This item is a reserved product
Estimated arrival date: ${incomingDate}*Delivery date may change due to factory production.
This item is a reserved product
Estimated arrival date: ${incomingDate}*Delivery date may change due to factory production.
This item is a reserved product
Estimated arrival date: ${incomingDate}*Delivery date may change due to factory production.
This item is a reserved product
Estimated arrival date: ${incomingDate}*Delivery date may change due to factory production.
■ Design
The successor to the Japan Motor Cycle Association (MFJ) official leather, KADOAYA has been designed using leather for racing suits for many years, has a successor to the Riders Jacket "BRMJ".
The shoulders and elbows are interior of a thin urethane pad that adapts to the movement to pursue safety and comfort. The pattern making is also renewed, and it will respond smoothly without pleats from the riding position to the upright posture.
In addition, the three front pockets are placed in a position that does not disturb the exercise, and the shoulder and elbow pad and the kidney panel are sewn in urethane sponge that enhances safety. In the classical design, such as an irregular double blest design that can easily return the lapel, it is packed with the functionality that modern riders seek.
The successor model BRMJ-2 is the first place to rely on a wide range of scenes, from touring to city riding in one place that has realized style and performance fusion.
■ Product feature
・ An irregular double blest design that can easily return lapel.
·made in Japan
■ material
Table: HF Minkle/(cow) 100%
Back: Polyester Super Hard Twill Quilting HF-MINKLE Japan Motorcycle Sports Association "HF Minkle Leather" has been used by KADOYA for many years. It has passed the strength inspection of the "Japan Leather Association" standards, such as tearing, pulling, friction, dyeing, and sunlight robbery. The domestic holstein leather, which is characterized by suppleness among cowhide, is used for the raw skin. Finished with full chrome tanned, it is soft and easy to fit into the body while leaving a firm stiffness. The surface is given the highest priority on the strength, and the pigment is sprayed by lacquer on the dyed base.
Country of origin
Japan
Size spec
size | M | L | LL | 3L |
bust | 102 | 106 | 110 | 114 |
Waist | 94 | 98 | 102 | 106 |
Hem Circumference | 98 | 102 | 106 | 110 |
Sleeve Length | 63 | 64 | 65 | 66 |
shoulder width | 43 | 44.5 | 46 | 47.5 |
Length | 63 | 64.5 | 66 | 67.5 |
*The unit is cm (centimeter)
*The listed size is the finished dimension and there may be slight differences depending on the product.
How to measure
How to choose size
How to wear | impression | from bust size | inner |
I want to wear tight | smart | +8cm | T-shirt |
I want to wear it as standard. | usually | +12cm | + Sweater/Hoodie |
I want to wear it loosely | wild | +16cm | + down / fleece |
* Due to the riding pattern, the sleeves may feel long.
*If the material is leather, the sleeve length will be shortened by 1-2 cm.
* If you are concerned about the length of the sleeves, it is possible to shorten the sleeves for an additional fee.
Size chart by body type
SIZE | S | M | L | LL | 3L | 4L |
Weight (kg) | 50~60 | 55~65 | 65~75 | 70~80 | 80~90 | ~100 |
Height(cm) | 155~170 | 160~175 | 165~180 | 170~185 | 175~190 | ~190 |
Bust(cm) | 86~90 | 90~94 | 94~98 | 98~102 | 102~106 | 106~110 |
Waist(cm)* | ~75 | ~80 | ~84 | ~89 | ~94 | ~99 |
*Please use the waist measurement as a reference for pants.
*The listed sizes are for reference only and may differ from the actual sizes.
About material
HF Minkle
KADOYA has been using this leather for many years as the official leather for the Japan Motorcycle Sports Association's ``MFJ Official Racing Suit'' . It has passed "leather inspection tests" such as tensile cutting load, tearing load, and abrasion strength at a high level.
The leather used is domestically produced Holstein leather, which is characterized by its suppleness even among cowhide. Finished with full chrome tanning, it is characterized by its firmness while remaining soft and comfortable to the body.
The surface is made with strength as the top priority, and the dyed base is treated with a pigment spraying process using lacquer.
Returns and Exchanges
If the size or image doesn't match
Returns and exchanges accepted
[Return and exchange conditions]
① Within 7 days of receiving the product
② Trying on clothes must be done indoors only.
3) The item must be in the same condition as when it was delivered
Notes
- Customers are responsible for shipping costs for returns and exchanges.
- Products that have been processed, such as having sleeves shortened or patches sewn on, and sale items are not eligible for return or exchange.
- The returned product will be considered a return or exchange depending on the result of the inspection. If the product is found to be damaged or missing, we may not be able to accept the return.
- For products delivered outside of Japan, please use the DHL return label issued by our company. Please note that shipping fees may be high due to international shipping, so we recommend that you check in advance.
Return Policy
If you wish to return an item, please log in to your returns page , select the item you wish to return, and submit a return request.
Once your request has been reviewed, you will be notified by email of approval, and you will then need to ship the item(s) back to the address listed in the email.
Once we have received the product, we will refund the product price or ship a replacement item.
* In the event of defective or incorrectly delivered products, shipping costs will be borne by our company.
Maintenance method
Just like with our skin, regular maintenance is important to prevent damage and keep leather products in good condition. Here we will introduce some self-maintenance methods to ensure you can enjoy your leather products for a long time.
(When using maintenance products such as cleaners or oils, always test on an inconspicuous area to make sure they do not cause stains or discoloration.)
Step 1
Use a horsehair brush to remove dirt and dust from the surface of the leather. Be sure to brush the seams as well. If the leather is very dirty, wipe it with a tightly wrung out wet towel.
Step 2
Take Ref / LEATHER CLEANER through the cloth until your fingers are slightly damp. When the cleaner has dried, soak the cloth with an appropriate amount again.
Step 3
Wipe the entire leather in several steps. This process will bring it closer to bare skin. Dirt and color will transfer to the cloth, but this is proof that the old oil and dirt have been removed.
Step 4
The finish can be either matte, natural or glossy depending on the oil characteristics, so please choose the oil according to your preference.
Step 5
Apply your chosen oil to the clean side of the cloth, using only small amounts of oil at a time.
Step 6
Apply the oil thinly, spreading it evenly over the entire leather. If there is not enough oil, add a little at a time.
Step 7
Brush the entire leather surface with a horsehair brush to allow the oil to soak in. For larger areas, it is more effective to use a larger brush. We recommend using a separate brush for dust removal.
Step 8
From here on, we will introduce a "step" that we recommend for those who want to pay more attention to the finish. Wipe the entire glove with the mouton side. Wiping it dry will remove any excess oil remaining on the surface and prevent stickiness.
Step 9
Finally, wipe the entire item with the suede side of a mouton glove. Polishing the leather with the suede side will give it a high-quality luster. The finishing mouton glove will also age with use, as the oil will soak in and the leather will develop a more sophisticated look.
About cleaning
We offer a specialized leather cleaning service called ``Refleather''.
What is Refresher?
The new common sense is to wash leather products before wearing them.
The traditional method of cleaning leather products in Japan has been dry cleaning using chlorinated solvents.
While this removes dirt, there are also cases in which the color fades and the oil content from the leather is removed, and using a fatliquoring agent to replace the lost fat content can result in an unnatural or unpleasant stickiness. There was a problem.
Ref Leather uses a special soap specifically for leather, and can be washed with water as well as dry. The important thing here is to remove dirt and replenish nutrients, including lost fat. This will restore suppleness and elasticity, allowing you to once again appreciate the gentleness and strength that leather originally possessed.
You can wash all kinds of leather products (genuine leather), including leather jackets, leather overalls, pants, coats, skirts, and boots. It is also possible to clean colored models that were avoided with conventional cleaning.
What is HEAD FACTORY?
Founded in 1935, in Asakusa, Tokyo, we have continuously nurtured our craftsmanship in making leather jackets.
This commitment is our proud philosophy that plays a part in Japanese manufacturing. The origin of HEAD FACTORY is the "skill" and "enthusiasm" cultivated by Kadoya craftsmen.
And this is my thoughts to all those who love leather jackets and motorcycles. We continue to create clothes that can be worn for generations without being swept away by the times.
HEAD FACTORY KADOYA MADE IN JAPAN
Embracing the craftsmen's passion in the brand tag, Kadoya's path to "better manufacturing"
the night before
Kadoya's craftsmen, who have been making leather jackets for a long time as a made-to-order leather shop, have accumulated technology that can respond to all needs over time.
As the world entered an era of mass production and mass consumption, the trend shifted toward ready-made clothes. In the midst of turbulent times, the skilled craftsmen led by Masataka Fukano, the second generation of the company, continued the custom-made production, while behind the scenes the development of ready-made clothes also started.
In 2003, the domestic brand "HEAD FACTORY", which was particular about "sewing one piece per person" as if going against the times, was transposed to the production of ready-made clothes. It was launched at the factory in the head office building in Asakusa.
Caution
- Natural leather has scratches, wrinkles, blood vessels and pore marks, uneven coloring, and color shading that are inherent to animal skin. Please understand this as a unique charm of leather.
- Chrome solvent is used to tan the leather. Please refrain from using if you have allergies.
- Mold is likely to grow in hot and humid environments, so please avoid moisture during storage and after use.
- Avoid washing leather products at home, and ask a cleaning shop that specializes in leather to do the washing.
- This product is designed based on standard Japanese sizes, but there are individual differences in body shape, so please check the size chart carefully.
- Product photos have been processed to match the actual color as closely as possible, but the color may differ from the actual product depending on your monitor settings, room lighting, etc.
- Metal parts may generate heat due to friction such as when falling. Wear innerwear to prevent the metal parts from coming into contact with your skin.
- This product is a fashion item. This is not a protective suit.
- Please do not use it for purposes other than its intended purpose, such as using it as a weapon or eating it.
Choose options
STAFF POST