BONNY-0 / Black

■Design
The Meriden series double riders are tight and simple. The front zipper stands at a nearly vertical angle, and when pulled up to the neck, it can be worn smartly like a single jacket.

is
.

■Material
Surface: Vintage steer / (cow) 100% Back: Polyester super hard twill quilting [What is vintage steer?] Leather changes its texture in various ways depending on the tanning method. Tannin tanning using natural materials develops a texture the more it is used, and is described as "glossy at the bottom", but it has low relative stretch and elasticity, and is vulnerable to water such as rain. In order to achieve both of these, "Vintage steer" is chrome tanned, and then some of the chrome components are removed, and the tannin tanning is firmly established as "non-chrome / mixed tanning". You can feel the unity that spreads to your body from the moment you put it on, and the flexibility and seating that retains the tannin-specific firmness. When you try it on, you will understand the "squeaky sound" that is unique to tannin tanning. It is a tasteful conclusion that reproduces the ancient teaching of leather, which is to unravel the habits of the body.

Japan

*The unit is cm (centimeter)
* The indicated size is the finished size, and there may be some errors depending on the product.

How to choose size

* Due to the riding pattern, the sleeves may feel long.
*If the material is leather, the sleeve length will be shortened by 1-2 cm.
* If you are concerned about the length of the sleeves, it is possible to shorten the sleeves for an additional fee.

*Please use the waist measurement as a reference for pants.
*The listed sizes are for reference only and may differ from the actual sizes.

Vintage steer

Tannin tanning using natural materials is said to have a texture that becomes more glossy the more it is used.

Chrome tanning, on the other hand, does not have as much texture as tannin, but it is soft, strong, water resistant and suitable for clothing. In order to achieve both of these, "Vintage Steer" has established "de-chromium/mixed tanning" in which half of the chromium component is removed after chrome tanning, and tannin tanning is performed.

You can feel the sense of unity that spreads to your body from the first time you wear it, and the suppleness and sitting that leave the waist peculiar to tannin. It is characterized by the squeaking sound that is unique to tannin tanning, which you can hear when you try it on.

It has a tasteful finish that reproduces the ancient teachings of leather to shape the habits of the body.

- Notes on leather -

* Vintage steer is leather with high plasticity. Please note that if there are large wrinkles or scratches when trying on the item, it may not be possible to return the item.

If the size or image doesn't match
Returns and exchanges accepted

[Return and exchange conditions]

① Within 7 days of receiving the product

② Trying on clothes must be done indoors only.

3) The item must be in the same condition as when it was delivered

Notes

• Customers are responsible for shipping costs for returns and exchanges.
• Products that have been processed, such as having sleeves shortened or patches sewn on, and sale items are not eligible for return or exchange.
• The returned product will be considered a return or exchange depending on the result of the inspection. If the product is found to be damaged or missing, we may not be able to accept the return.
• For products delivered outside of Japan, please use the DHL return label issued by our company. Please note that shipping fees may be high due to international shipping, so we recommend that you check in advance.

Return Policy

If you wish to return an item, please log in to your returns page , select the item you wish to return, and submit a return request.
Once your request has been reviewed, you will be notified by email of approval, and you will then need to ship the item(s) back to the address listed in the email.
Once we have received the product, we will refund the product price or ship a replacement item.

* In the event of defective or incorrectly delivered products, shipping costs will be borne by our company.

Just like with our skin, regular maintenance is important to prevent damage and keep leather products in good condition. Here we will introduce some self-maintenance methods to ensure you can enjoy your leather products for a long time.

(When using maintenance products such as cleaners or oils, always test on an inconspicuous area to make sure they do not cause stains or discoloration.)

Step 1

Use a horsehair brush to remove dirt and dust from the surface of the leather. Be sure to brush the seams as well. If the leather is very dirty, wipe it with a tightly wrung out wet towel.

Step 2

Take Ref / LEATHER CLEANER through the cloth until your fingers are slightly damp. When the cleaner has dried, soak the cloth with an appropriate amount again.

Step 3

Wipe the entire leather in several steps. This process will bring it closer to bare skin. Dirt and color will transfer to the cloth, but this is proof that the old oil and dirt have been removed.

Step 4

The finish can be either matte, natural or glossy depending on the oil characteristics, so please choose the oil according to your preference.

Step 5

Apply your chosen oil to the clean side of the cloth, using only small amounts of oil at a time.

Step 6

Apply the oil thinly, spreading it evenly over the entire leather. If there is not enough oil, add a little at a time.

Step 7

Brush the entire leather surface with a horsehair brush to allow the oil to soak in. For larger areas, it is more effective to use a larger brush. We recommend using a separate brush for dust removal.

Step 8

From here on, we will introduce a "step" that we recommend for those who want to pay more attention to the finish. Wipe the entire glove with the mouton side. Wiping it dry will remove any excess oil remaining on the surface and prevent stickiness.

We offer a specialized leather cleaning service called ``Refleather''.

What is Refresher?

The new common sense is to wash leather products before wearing them.

The traditional method of cleaning leather products in Japan has been dry cleaning using chlorinated solvents.

While this removes dirt, there are also cases in which the color fades and the oil content from the leather is removed, and using a fatliquoring agent to replace the lost fat content can result in an unnatural or unpleasant stickiness. There was a problem.

Ref Leather uses a special soap specifically for leather, and can be washed with water as well as dry. The important thing here is to remove dirt and replenish nutrients, including lost fat. This will restore suppleness and elasticity, allowing you to once again appreciate the gentleness and strength that leather originally possessed.

You can wash all kinds of leather products (genuine leather), including leather jackets, leather overalls, pants, coats, skirts, and boots. It is also possible to clean colored models that were avoided with conventional cleaning.

Click here for details

Founded in 1935, in Asakusa, Tokyo, we have continuously nurtured our craftsmanship in making leather jackets.

This commitment is our proud philosophy that plays a part in Japanese manufacturing. The origin of HEAD FACTORY is the "skill" and "enthusiasm" cultivated by Kadoya craftsmen.

And this is my thoughts to all those who love leather jackets and motorcycles. We continue to create clothes that can be worn for generations without being swept away by the times.

HEAD FACTORY KADOYA MADE IN JAPAN

Embracing the craftsmen's passion in the brand tag, Kadoya's path to "better manufacturing"

the night before

Kadoya's craftsmen, who have been making leather jackets for a long time as a made-to-order leather shop, have accumulated technology that can respond to all needs over time.

As the world entered an era of mass production and mass consumption, the trend shifted toward ready-made clothes. In the midst of turbulent times, the skilled craftsmen led by Masataka Fukano, the second generation of the company, continued the custom-made production, while behind the scenes the development of ready-made clothes also started.

In 2003, the domestic brand "HEAD FACTORY", which was particular about "sewing one piece per person" as if going against the times, was transposed to the production of ready-made clothes. It was launched at the factory in the head office building in Asakusa.