SHINYA REPRICA

HAMMER BOOTS SHORT / BLACK/SILVER

SKU: 4512-0-291-049

¥57,200 (JPY)
Color: black/silver
size:
Only 4 pieces in stock!
Quantity:

Harder and more violent, the peerless bikers nine-hole boots "Hammer Short" with metal protectors are back with a matte black plate black x black version added to the lineup.

■ Design
Harder and more violent, the peerless bikers nine-hole boots "Hammer Short" with metal protectors are back with a matte black plate black x black version added to the lineup. Although it is a 9.5-inch lace-up boot, it is equipped with a zipper on the inside to make it easy to put on and take off. The stainless steel protector, which is the biggest feature, creates a shape according to the part and increases the strength by embossed lines, shin guard (0.6 mm embossed logo mark), side guard (0.6 mm), armor guard (0.6 mm), heel plate It is attached to each part as a guard (0.8mm) and toe bumper (3mm / detachable) to protect the body from damage such as falling.

■ Product features
SHINYA REPLICA Each part plate guard

■ Material
(Sole) Trek Biker Zoo Sole (Upper) Oil Cow x Stainless Steel (Lining) Sweat Absorbent Antibacterial Nylon, SOLTURA Insole

■ Wise
EE

size 24.5 twenty five 25.5 26.0 26.5 27 27.5 28

*The unit is cm (centimeter)
* The indicated size is the finished size, and there may be some errors depending on the product.


Please choose the same size as the actual size or +0.5cm larger size.

The size may vary depending on the height of the instep and the shape of the foot.

Leather products, which play an active role as a partner to wear on a daily basis, become more attractive and attached to them the more you use them. However, when used for motorcycle riding, it is in an environment where it is easy to get dirty.

In order to prevent damage and improve the condition, it is important to take care of it on a regular basis, just like our skin. Here, we will introduce a self-maintenance method for using leather products for a long time.

(When using maintenance agents such as cleaners and oils, be sure to test in an inconspicuous area and confirm that there is no staining or discoloration before using.)

step 1

Use a horsehair brush to remove dirt and dust from the surface of the leather. Don't forget to brush the seams as well. If the stain is severe, wipe the leather surface with a wet towel that has been tightly wrung out.

step 2

Remove the Ref / LEATHER CLEANER through the cloth (cloth) until your fingers are slightly damp. When the cleaner dries, apply an appropriate amount to the cloth again.

step 3

Wipe the entire leather in several batches. By doing this work, you can get closer to the state of no makeup on your skin. Dirt and color are transferred to the cloth, but this is proof that the old oil and dirt that has migrated have been removed.

step 4

The finish is divided into matte finish, natural finish, and glossy finish depending on the oil characteristics, so please choose the oil you like.

step 5

Apply the oil of your choice to the clean side of the cloth. Take small amounts of oil.

step 6

Apply the oil while spreading it thinly so that it fits the entire leather. If you don't have enough oil, add little by little.

Step 7

Brush the entire leather with a horsehair brush to absorb the nutrients of the oil. For large areas, it is efficient to use a large brush. At that time, we recommend using a brush different from the dust remover.

Step 8

From here, I would like to recommend "one effort" for those who want to be more particular about finishing. Wipe the whole with the mouton side of the mouton glove. By wiping with a dry cloth, excess oil remaining on the surface is removed to prevent stickiness.

step 9

Finally, wipe the whole with the suede side of the mouton glove. Polishing the leather on the suede side gives it a high-quality luster. By using the finished mouton gloves, the oil will blend in and the taste will increase, and you can enjoy aging.

We offer a leather cleaning service called Refleather.

What is a refresher?

It is a new common sense to wash and wear leather products.

In Japan, dry cleaning using chlorinated solvents has been the main method of cleaning leather products.

While this removes dirt, there are also cases where the color fades and the oil of the leather is removed. I had a problem.

Refleather uses a special soap for leather, which can be washed with water in addition to being dry. The important thing here is to remove the dirt and supplement the nutrients including the lost fat. As a result, the suppleness and elasticity are restored, and you should be able to feel the gentleness and strength that the original leather had.

All leather products (genuine leather) such as leather jackets, leather jumpsuits, pants, coats, skirts, and boots can be washed. It is also possible to clean color scheme models that were avoided in conventional cleaning.

Click here for details

A lineup produced by "Shinya Sato" who was called Mr.Bike. The strongest protective clothing in history, "BATTLE SUITS", has continued to spark the admiration and brilliance of motorcycle riders for a quarter of a century. The battle uniform form is backed by the safety of the bones.

Product variation

Compatible protector

    

maintenance goods

    

SET ITEM

    
  
  
  

Recently Viewed Products