RUBICON-WP GLOVE

■ Design
A waterproof winter glove that uses fabric and leather in a combination. Based on nylon material used for outdoor outter wear, the contrast between leather and synthetic suede creates elegance. Functions such as three -dimensional cutting and smartphone touch taking handle operation are also enhanced. The interior is adopted by the batting and a shaggy bore material to ensure heat insulation and heat retention.

■ Product feature
・ Party A/Knuckle Protector

■ material
Table: Gote skin, synthetic suede conductive, synthetic suede, goat back.
Back: Polyester fleece (batting, moisture permeability waterproof liner)

China

*The unit is cm (centimeter)
*The listed size is the finished dimension and there may be slight differences depending on the product.

The size of the glove is the circumference of the palm that connects the starting point of the life line, which is roughly the same position as the first joint of the left (right) thumb, and the line connecting the base of the pinky finger and the wrist, which is 1/3 the distance from the wrist. Length expressed in centimeters.

All KADOYA products are written in Japanese size.
In the table below, please check the Japanese size and overseas size (US, EU, UK).
(The sense of size varies depending on the manufacturer, so please check it as a reference.)

Men's size

Ladies size

Goatskin

Goatskin is an attractive leather that is lightweight, easy to wear, extremely durable, and resistant to abrasion.

It has a soft texture that feels like it sticks to your hand. The texture of the surface gives a soft impression and has an elegant texture.

The more you use it, the more it develops a luster and becomes brighter, revealing a "deep, calm luster" rather than a shiny luster. As the wrinkles deepen over time, the grooves of the wrinkles darken in color and become more uneven, giving it a three-dimensional texture.

Just like with our skin, regular maintenance is important to prevent damage and keep leather products in good condition. Here we will introduce some self-maintenance methods to ensure you can enjoy your leather products for a long time.

(When using maintenance products such as cleaners or oils, always test on an inconspicuous area to make sure they do not cause stains or discoloration.)

Step 1

Use a horsehair brush to remove dirt and dust from the surface of the leather. Be sure to brush the seams as well. If the leather is very dirty, wipe it with a tightly wrung out wet towel.

Step 2

Take Ref / LEATHER CLEANER through the cloth until your fingers are slightly damp. When the cleaner has dried, soak the cloth with an appropriate amount again.

Step 3

Wipe the entire leather in several steps. This process will bring it closer to bare skin. Dirt and color will transfer to the cloth, but this is proof that the old oil and dirt have been removed.

Step 4

The finish can be either matte, natural or glossy depending on the oil characteristics, so please choose the oil according to your preference.

Step 5

Apply your chosen oil to the clean side of the cloth, using only small amounts of oil at a time.

Step 6

Apply the oil thinly, spreading it evenly over the entire leather. If there is not enough oil, add a little at a time.

Step 7

Brush the entire leather surface with a horsehair brush to allow the oil to soak in. For larger areas, it is more effective to use a larger brush. We recommend using a separate brush for dust removal.

Step 8

From here on, we will introduce a "step" that we recommend for those who want to pay more attention to the finish. Wipe the entire glove with the mouton side. Wiping it dry will remove any excess oil remaining on the surface and prevent stickiness.

We offer a specialized leather cleaning service called ``Refleather''.

What is Refresher?

The new common sense is to wash leather products before wearing them.

The traditional method of cleaning leather products in Japan has been dry cleaning using chlorinated solvents.

While this removes dirt, there are also cases in which the color fades and the oil content from the leather is removed, and using a fatliquoring agent to replace the lost fat content can result in an unnatural or unpleasant stickiness. There was a problem.

Ref Leather uses a special soap specifically for leather, and can be washed with water as well as dry. The important thing here is to remove dirt and replenish nutrients, including lost fat. This will restore suppleness and elasticity, allowing you to once again appreciate the gentleness and strength that leather originally possessed.

You can wash all kinds of leather products (genuine leather), including leather jackets, leather overalls, pants, coats, skirts, and boots. It is also possible to clean colored models that were avoided with conventional cleaning.

Click here for details

From simple and basic high-quality standards to avant-garde items based on the highest specs and philosophy. A rider wear brand that goes well with town use as well as commitment to safety and functionality.