■Design "EGBROWN-A" is a thick sole specification of EGBROWN that takes into consideration the comfort of the feet. These short boots combine the hardness of engineer boots with the easy entry and hold of the rear entry. The simple design and old brown color make it easy to match with both casual and classic styles, and the nubuck-finished pull-up oil cow leather becomes more flavorful the more you wear it. The selling point is the wide stance for everything from street use to motorcycle use. The sole is 12.5mm thicker at the toe area and 25mm thicker at the heel than the regular model. It uses our original "TRECKBIKERSSOLE" which has excellent operability and running performance, making it easy to wear even with thick soles.

■Product features Inner pad/Inner change pad

■Material Sole: Trek Bikers Sole Upper: Cow nubuck Lining: Pigskin

■Wise
EEE

size	22.5	twenty three	23.5	24.0

*The unit is cm (centimeter)
* The indicated size is the finished size, and there may be some errors depending on the product.

Please choose the same size as the actual size or +0.5cm larger size.

The size may vary depending on the height of the instep and the shape of the foot.

All KADOYA products are written in Japanese size.
In the table below, please check the Japanese size and overseas size (US, EU, UK).
(The sense of size varies depending on the manufacturer, so please check it as a reference.)

Men's size

Japanese size	US size	EU size	UK size
S	XS	44	34
M	S	46	36
L	M	48	38
LL	L	50	40
3L	XL	52	42
4L	XXL	54	44
5L	3XL	56	46

Ladies size

Japanese size	US size	EU size	UK size
S	XS	34	6
M	S	36	8
L	M	38	10

Leather products are our everyday companions, and the more we use them, the more character they acquire and the more we grow to love them. However, when we use them while riding a motorcycle, they are in an environment where they are prone to getting dirty.

Just like with our skin, regular maintenance is important to prevent damage and keep leather products in good condition. Here we will introduce some self-maintenance methods to ensure you can enjoy your leather products for a long time.

(When using maintenance products such as cleaners or oils, always test on an inconspicuous area to make sure they do not cause stains or discoloration.)

Step 1

Use a horsehair brush to remove dirt and dust from the surface of the leather. Be sure to brush the seams as well. If the leather is very dirty, wipe it with a tightly wrung out wet towel.

Step 2

Take Ref / LEATHER CLEANER through the cloth until your fingers are slightly damp. When the cleaner has dried, soak the cloth with an appropriate amount again.

Step 3

Wipe the entire leather in several steps. This process will bring it closer to bare skin. Dirt and color will transfer to the cloth, but this is proof that the old oil and dirt have been removed.

Step 4

The finish can be either matte, natural or glossy depending on the oil characteristics, so please choose the oil according to your preference.

Step 5

Apply your chosen oil to the clean side of the cloth, using only small amounts of oil at a time.

Step 6

Apply the oil thinly, spreading it evenly over the entire leather. If there is not enough oil, add a little at a time.

Step 7

Brush the entire leather surface with a horsehair brush to allow the oil to soak in. For larger areas, it is more effective to use a larger brush. We recommend using a separate brush for dust removal.

Step 8

From here on, we will introduce a "step" that we recommend for those who want to pay more attention to the finish. Wipe the entire glove with the mouton side. Wiping it dry will remove any excess oil remaining on the surface and prevent stickiness.

We offer a specialized leather cleaning service called ``Refleather''.

What is Refresher?

The new common sense is to wash leather products before wearing them.

The traditional method of cleaning leather products in Japan has been dry cleaning using chlorinated solvents.

While this removes dirt, there are also cases in which the color fades and the oil content from the leather is removed, and using a fatliquoring agent to replace the lost fat content can result in an unnatural or unpleasant stickiness. There was a problem.

Ref Leather uses a special soap specifically for leather, and can be washed with water as well as dry. The important thing here is to remove dirt and replenish nutrients, including lost fat. This will restore suppleness and elasticity, allowing you to once again appreciate the gentleness and strength that leather originally possessed.

You can wash all kinds of leather products (genuine leather), including leather jackets, leather overalls, pants, coats, skirts, and boots. It is also possible to clean colored models that were avoided with conventional cleaning.

Click here for details

From simple and basic high-quality standards to avant-garde items based on the highest specs and philosophy. A rider wear brand that goes well with town use as well as commitment to safety and functionality.