■Design
This high-performance neck warmer uses HRT-6 series fabric, which is a high-performance material that boasts high wind resistance and heat storage performance, making it comfortable during the winter season. The breathable and waterproof properties reduce the accumulation of moisture from your breath, and the stretchability makes it easy to put on and take off. Other features include UV protection, sweat absorption and quick drying, and antibacterial and deodorizing properties. The design is designed to be combined with various outerwear, with a unique texture with reduced gloss and a calm atmosphere in black. This high-performance neck warmer with excellent cold protection performance has a simple design that can be used in a variety of motorcycle scenes.

■ Product Features
・TPU film: Water resistance 5,000mm/Breathability 3000g/m2/24h
・Heat storage and insulation・Breathable and waterproof・Stretch・Fleece lining・UV protection・Sweat absorption and quick drying・Antibacterial and deodorizing processing

■Material
Surface: Polyester (three-layer)
Lining: Polyester fleece

China

*The unit is cm (centimeter)
*The listed size is the finished dimension and there may be slight differences depending on the product.

All KADOYA products are written in Japanese size.
In the table below, please check the Japanese size and overseas size (US, EU, UK).
(The sense of size varies depending on the manufacturer, so please check it as a reference.)

Men's size

Ladies size

Just like with our skin, regular maintenance is important to prevent damage and keep leather products in good condition. Here we will introduce some self-maintenance methods to ensure you can enjoy your leather products for a long time.

(When using maintenance products such as cleaners or oils, always test on an inconspicuous area to make sure they do not cause stains or discoloration.)

Step 1

Use a horsehair brush to remove dirt and dust from the surface of the leather. Be sure to brush the seams as well. If the leather is very dirty, wipe it with a tightly wrung out wet towel.

Step 2

Take Ref / LEATHER CLEANER through the cloth until your fingers are slightly damp. When the cleaner has dried, soak the cloth with an appropriate amount again.

Step 3

Wipe the entire leather in several steps. This process will bring it closer to bare skin. Dirt and color will transfer to the cloth, but this is proof that the old oil and dirt have been removed.

Step 4

The finish can be either matte, natural or glossy depending on the oil characteristics, so please choose the oil according to your preference.

Step 5

Apply your chosen oil to the clean side of the cloth, using only small amounts of oil at a time.

Step 6

Apply the oil thinly, spreading it evenly over the entire leather. If there is not enough oil, add a little at a time.

Step 7

Brush the entire leather surface with a horsehair brush to allow the oil to soak in. For larger areas, it is more effective to use a larger brush. We recommend using a separate brush for dust removal.

Step 8

From here on, we will introduce a "step" that we recommend for those who want to pay more attention to the finish. Wipe the entire glove with the mouton side. Wiping it dry will remove any excess oil remaining on the surface and prevent stickiness.

From simple and basic high-quality standards to avant-garde items based on the highest specs and philosophy. A rider wear brand that goes well with town use as well as commitment to safety and functionality.