PL-EVO / Black

Vietnam

*The unit is cm (centimeter)
* The indicated size is the finished size, and there may be some errors depending on the product.

How to choose size

* Due to the riding pattern, the sleeves may feel long.
*If the material is leather, the sleeve length will be shortened by 1-2 cm.
* If you are concerned about the length of the sleeves, it is possible to shorten the sleeves for an additional fee.

*The indicated size is for reference only and may differ from the actual size.

Air-through cowhide

Air-through cowhide is 1.3 to 1.5 mm thick cowhide leather with 2 mm diameter ventilation holes. The distance between the holes is 5mm, which is the best balance achieved through our years of development and experience.

The larger the ventilation holes, the cooler it will be, but you also have to consider the risk of them tearing through the holes if you fall while riding. The answer we arrived at was a 2mm diameter hole and a 5mm pitch. These values are necessary to maintain the strength of the leather.

Additionally, the leather surface is embossed. This not only gives the leather an appearance, but also gives it hardness, and by making holes in the hard leather, air-through cowhide maintains its best strength.

In order to prevent damage and improve the condition, it is important to take care of it on a regular basis, just like our skin. Here, we will introduce a self-maintenance method for using leather products for a long time.

(When using maintenance agents such as cleaners and oils, be sure to test in an inconspicuous area and confirm that there is no staining or discoloration before using.)

step 1

Use a horsehair brush to remove dirt and dust from the surface of the leather. Don't forget to brush the seams as well. If the stain is severe, wipe the leather surface with a wet towel that has been tightly wrung out.

step 2

Remove the Ref / LEATHER CLEANER through the cloth (cloth) until your fingers are slightly damp. When the cleaner dries, apply an appropriate amount to the cloth again.

step 3

Wipe the entire leather in several batches. By doing this work, you can get closer to the state of no makeup on your skin. Dirt and color are transferred to the cloth, but this is proof that the old oil and dirt that has migrated have been removed.

step 4

The finish is divided into matte finish, natural finish, and glossy finish depending on the oil characteristics, so please choose the oil you like.

step 5

Apply the oil of your choice to the clean side of the cloth. Take small amounts of oil.

step 6

Apply the oil while spreading it thinly so that it fits the entire leather. If you don't have enough oil, add little by little.

Step 7

Brush the entire leather with a horsehair brush to absorb the nutrients of the oil. For large areas, it is efficient to use a large brush. At that time, we recommend using a brush different from the dust remover.

Step 8

From here, I would like to recommend "one effort" for those who want to be more particular about finishing. Wipe the whole with the mouton side of the mouton glove. By wiping with a dry cloth, excess oil remaining on the surface is removed to prevent stickiness.

We offer a specialized leather cleaning service called ``Refleather''.

What is Refresher?

The new common sense is to wash leather products before wearing them.

The traditional method of cleaning leather products in Japan has been dry cleaning using chlorinated solvents.

While this removes dirt, there are also cases in which the color fades and the oil content from the leather is removed, and using a fatliquoring agent to replace the lost fat content can result in an unnatural or unpleasant stickiness. There was a problem.

Ref Leather uses a special soap specifically for leather, and can be washed with water as well as dry. The important thing here is to remove dirt and replenish nutrients, including lost fat. This will restore suppleness and elasticity, allowing you to once again appreciate the gentleness and strength that leather originally possessed.

You can wash all kinds of leather products (genuine leather), including leather jackets, leather overalls, pants, coats, skirts, and boots. It is also possible to clean colored models that were avoided with conventional cleaning.

Click here for details

From simple and basic high-quality standards to avant-garde items based on the highest specs and philosophy. A rider wear brand that goes well with town use as well as commitment to safety and functionality.