K'S LEATHER&K'S PRODUCT

BRAWLER PANTS-PL / BLACK

SKU: 2276-0-200-003

¥51,150 (JPY)
Color: black
size:
Only 2 pieces in stock!
Quantity:

Punching leather type appeared in BRAWLER PANTS for all season riding pants. While maintaining safety and functionality, it is designed to be cool and comfortable to enjoy riding even in summer.
kadoya official online


By using perforated leather for the front thighs and sight parts, it is made to take in plenty of running wind and release stuffiness.
kadoya official online


Knees, buttocks, and lower front knees are usually made of leather to ensure safety in the event of a fall and prevent heat build-up from the bike.
kadoya official online


The punching process creates a more flexible and lighter finish, making it a garment that naturally fits the body and movement.
kadoya official online


Stretch nylon material is placed on the inner thighs and back to improve ease of movement and fit.
kadoya official online


A pad pocket that can be accessed from the outside is placed on the knee. A CE LEVEL 1 thin and lightweight pad is standard equipment inside. High safety is achieved by inserting a punched sponge pad on the waist.
kadoya official online


A zipper is placed on the hem to make it easy to put on and take off, and it has a slightly tapered straight silhouette that can be worn both in and out of boots.
kadoya official online

■ Design
A punching model of BRAWLER PANTS that uses different materials in consideration of the arrangement and function of the characteristic switching lines, creating a newness that is different from the past. Considering the movement of the crotch and knees, elastic nylon material is partially adopted. By combining different materials, it is easier to wear than conventional all-leather riding pants, realizing light comfort and mobility. The knee pads are equipped with CE LEVEL 1 as standard, and can be easily attached and detached from the ZIP on the knees.

■ Product features
・Employs a head factory pattern based on ergonomics ・Equipped with sponge pads on the waist and CE LEVEL1 pads on the knees as standard equipment.

■ Material
Front/Punching cowhide (cowhide) *Punching diameter 2mm Stretch nylon Back/Polyester mesh (COOL DEHYBER)

size M. L. LL 3L
waist 77.7 82.7 87.7 92.7
hip 96.8 101.8 106.8 111.8
Back rise 35.3 36.5 37.6 38.8
front rise 18.5 19.6 20.7 21.7
inseam 86 86 86 86
thigh 55.3 58.5 61.5 64.7
around the knee 44.5 46.9 49.3 51.7
around the hem 36 38 40 42

*The unit is cm (centimeter)
* The indicated size is the finished size, and there may be some errors depending on the product.

SIZE S. M. L. LL 3L 4L
Weight (kg) 50~60 55~65 65~75 70~80 80~90 ~100
Height (cm) 155~170 160~175 165~180 170~185 175~190 ~190
Bust (cm) 82~90 86~94 92~100 96~104 100~108 104~112
Waist (cm) 66~78 70~82 78~86 82~90 86~94 90~98


*The indicated size is for reference only and may differ from the actual size.

What is punching cow?

The punching cow has 2mm diameter ventilation holes in 1.3 to 1.5mm thick glossy cowhide leather, and the spacing between the holes is 5mm, which is the best balance derived from the company's many years of development and experience. .

The bigger the vent, the cooler it will be, but it is also possible that it will tear from the hole if it falls over. The answer given there is 2mm diameter. A pitch of 5 mm is also a necessary number to maintain the strength of the leather.

Furthermore, the embossing on the surface not only creates an expression on the leather, but also plays a role in hardening the leather.

Leather products, which play an active role as a partner to wear on a daily basis, become more attractive and attached to them the more you use them. However, when used for motorcycle riding, it is in an environment where it is easy to get dirty.

In order to prevent damage and improve the condition, it is important to take care of it on a regular basis, just like our skin. Here, we will introduce a self-maintenance method for using leather products for a long time.

(When using maintenance agents such as cleaners and oils, be sure to test in an inconspicuous area and confirm that there is no staining or discoloration before using.)

step 1

Use a horsehair brush to remove dirt and dust from the surface of the leather. Don't forget to brush the seams as well. If the stain is severe, wipe the leather surface with a wet towel that has been tightly wrung out.

step 2

Remove the Ref / LEATHER CLEANER through the cloth (cloth) until your fingers are slightly damp. When the cleaner dries, apply an appropriate amount to the cloth again.

step 3

Wipe the entire leather in several batches. By doing this work, you can get closer to the state of no makeup on your skin. Dirt and color are transferred to the cloth, but this is proof that the old oil and dirt that has migrated have been removed.

step 4

The finish is divided into matte finish, natural finish, and glossy finish depending on the oil characteristics, so please choose the oil you like.

step 5

Apply the oil of your choice to the clean side of the cloth. Take small amounts of oil.

step 6

Apply the oil while spreading it thinly so that it fits the entire leather. If you don't have enough oil, add little by little.

Step 7

Brush the entire leather with a horsehair brush to absorb the nutrients of the oil. For large areas, it is efficient to use a large brush. At that time, we recommend using a brush different from the dust remover.

Step 8

From here, I would like to recommend "one effort" for those who want to be more particular about finishing. Wipe the whole with the mouton side of the mouton glove. By wiping with a dry cloth, excess oil remaining on the surface is removed to prevent stickiness.

step 9

Finally, wipe the whole with the suede side of the mouton glove. Polishing the leather on the suede side gives it a high-quality luster. By using the finished mouton gloves, the oil will blend in and the taste will increase, and you can enjoy aging.

We offer a leather cleaning service called Refleather.

What is a refresher?

It is a new common sense to wash and wear leather products.

In Japan, dry cleaning using chlorinated solvents has been the main method of cleaning leather products.

While this removes dirt, there are also cases where the color fades and the oil of the leather is removed. I had a problem.

Refleather uses a special soap for leather, which can be washed with water in addition to being dry. The important thing here is to remove the dirt and supplement the nutrients including the lost fat. As a result, the suppleness and elasticity are restored, and you should be able to feel the gentleness and strength that the original leather had.

All leather products (genuine leather) such as leather jackets, leather jumpsuits, pants, coats, skirts, and boots can be washed. It is also possible to clean color scheme models that were avoided in conventional cleaning.

Click here for details

From simple and basic high-quality standards to avant-garde items based on the highest specs and philosophy. A rider wear brand that goes well with town use as well as commitment to safety and functionality.

日本国外からのご注文の場合は下記をタップしてご注文ください。

 

※バナーが表示されない場合はこちらをクリックしてご注文ください。

https://www.fromjapan.co.jp/japan/special/order/wellcome/

お客様のお支払い手続きや配送などを当社に代わりFROM JAPANが行ないます。

FROM JAPAN以外の転送会社を利用してのご注文はトラブル回避のためキャンセルとさせていただきますのでご注意ください。

Compatible protector

    

You can use this element to add a quote, content...

maintenance goods

    

SET ITEM

    
  
  
  

Recently Viewed Products