| size | S. | M. | L. | LL | 3L | 4L |
| bust | 101 | 105 | 109 | 113 | 117 | one two three |
| waist | 93.5 | 97.5 | 101.5 | 105.5 | 109.5 | 115.5 |
| around the hem | 94.5 | 98.5 | 102.5 | 106.5 | 110.5 | 116.5 |
| Sleeve Length | 18.5 | 19.5 | 20.5 | 21.5 | 22.5 | 23.5 |
| neck circumference | 45.5 | 45.5 | 47 | 47 | 48.5 | 49.5 |
| shoulder width | 43 | 44 | 45.5 | 47 | 48.5 | 49.5 |
| Length | 62.5 | 63.5 | 65 | 66.5 | 68 | 69 |
*The unit is cm (centimeter)
* The indicated size is the finished size, and there may be some errors depending on the product.
How to choose size
| How to wear | impression | from bust size | inner |
| I want to wear tight | smart | +8cm | T-shirt |
| I want to wear it as standard. | usually | +12cm | + Sweater/Hoodie |
* Due to the riding pattern, the sleeves may feel long.
*If the material is leather, the sleeve length will be shortened by 1-2 cm.
* If you are concerned about the length of the sleeves, it is possible to shorten the sleeves for an additional fee.
| SIZE | S. | M. | L. | LL | 3L | 4L |
| Weight (kg) | 50~60 | 55~65 | 65~75 | 70~80 | 80~90 | ~100 |
| Height (cm) | 155~170 | 160~175 | 165~180 | 170~185 | 175~190 | ~190 |
| Bust (cm) | 82~90 | 86~94 | 92~100 | 96~104 | 100~108 | 104~112 |
| Waist (cm) | 66~78 | 70~82 | 78~86 | 82~90 | 86~94 | 90~98 |
*The indicated size is for reference only and may differ from the actual size.
What is punching cow?
The punching cow has 2mm diameter ventilation holes in 1.3 to 1.5mm thick glossy cowhide leather, and the spacing between the holes is 5mm, which is the best balance derived from the company's many years of development and experience. .
The bigger the vent, the cooler it will be, but it is also possible that it will tear from the hole if it falls over. The answer given there is 2mm diameter. A pitch of 5 mm is also a necessary number to maintain the strength of the leather.
Furthermore, the embossing on the surface not only creates an expression on the leather, but also plays a role in hardening the leather.
In order to prevent damage and improve the condition, it is important to take care of it on a regular basis, just like our skin. Here, we will introduce a self-maintenance method for using leather products for a long time.
(When using maintenance agents such as cleaners and oils, be sure to test in an inconspicuous area and confirm that there is no staining or discoloration before using.)
step 1
Use a horsehair brush to remove dirt and dust from the surface of the leather. Don't forget to brush the seams as well. If the stain is severe, wipe the leather surface with a wet towel that has been tightly wrung out.
step 2
Remove the Ref / LEATHER CLEANER through the cloth (cloth) until your fingers are slightly damp. When the cleaner dries, apply an appropriate amount to the cloth again.
step 3
Wipe the entire leather in several batches. By doing this work, you can get closer to the state of no makeup on your skin. Dirt and color are transferred to the cloth, but this is proof that the old oil and dirt that has migrated have been removed.
step 4
The finish is divided into matte finish, natural finish, and glossy finish depending on the oil characteristics, so please choose the oil you like.
step 5
Apply the oil of your choice to the clean side of the cloth. Take small amounts of oil.
step 6
Apply the oil while spreading it thinly so that it fits the entire leather. If you don't have enough oil, add little by little.
Step 7
Brush the entire leather with a horsehair brush to absorb the nutrients of the oil. For large areas, it is efficient to use a large brush. At that time, we recommend using a brush different from the dust remover.
Step 8
From here, I would like to recommend "one effort" for those who want to be more particular about finishing. Wipe the whole with the mouton side of the mouton glove. By wiping with a dry cloth, excess oil remaining on the surface is removed to prevent stickiness.
step 9
We offer a leather cleaning service called Refleather.
What is a refresher?
It is a new common sense to wash and wear leather products.
In Japan, dry cleaning using chlorinated solvents has been the main method of cleaning leather products.
While this removes dirt, there are also cases where the color fades and the oil of the leather is removed. I had a problem.
Refleather uses a special soap for leather, which can be washed with water in addition to being dry. The important thing here is to remove the dirt and supplement the nutrients including the lost fat. As a result, the suppleness and elasticity are restored, and you should be able to feel the gentleness and strength that the original leather had.
All leather products (genuine leather) such as leather jackets, leather jumpsuits, pants, coats, skirts, and boots can be washed. It is also possible to clean color scheme models that were avoided in conventional cleaning.
From simple and basic high-quality standards to avant-garde items based on the highest specs and philosophy. A rider wear brand that goes well with town use as well as commitment to safety and functionality.
Product variation
Compatible protector
maintenance goods
