BRMJ-PL / Black

SKU: 0826-0-200-003

¥170,500 (JPY)
Color: black
Only 2 pieces in stock!

kadoya official online

The front and cuffs use injection fasteners "MZF", which are made using the same injection molding die-casting method as conventional products.
kadoya official online

The main body leather is HF-MINKLE LEATHER, which boasts MFJ-approved circuit specs like the regular lineup, and is a special specification that has been punched to a diameter of 2mm.
kadoya official online

The stitching and fastener tape are unified in black, giving a cool and solid impression with a monotone overall.
kadoya official online

Since there is no change in form and size, it is also recommended as a summer gear for BRMJ users.
kadoya official online

Collar, pocket, shoulder and elbow pads are a combination design with smooth leather usually placed in consideration of safety and comfort.
kadoya official online

■ Design
The base was the BRMJ, a riding model that strangely matches any bike, despite its dark appearance. The main body leather is HF-MINKLE LEATHER, which boasts MFJ official circuit specs like the regular lineup, and is a special specification that has been punched to a diameter of 2 mm.

■ Product features
・Country of origin (Made in Japan) ・A field sensor is used for the lining (capillary action with a multi-layered structure combining threads with different thicknesses in 2 layers and 3 layers absorbs a large amount of sweat, moves and diffuses in one direction, dry.)

■ Material
Front / HF Minkle / (cow) (punching) Back / Field sensor (100% polyester) HF-MINKLE Japan Motorcycle Sports Association MFJ official leather, KADOYA has been using it for many years "HF Minkle leather". It has passed the "Japan Leather Association" standard strength test such as tearing, pulling, rubbing, dyeing, and sunlight fastness at a high level. Domestic Holstein leather, which is characterized by its suppleness even among cowhide, is used for the raw leather. Finished with full chrome tanning, it retains its firmness while remaining soft and comfortable to the body. The surface gives top priority to strength, and lacquer is sprayed on the dyed base. The texture of deep shadows created by shrink processing also has the effect of making scratches less noticeable.

size M. L. LL
bust 101 105 109
waist 90 94 98
around the hem 94 98 102
Sleeve Length 62.5 63.5 64.5
shoulder width 41 42.5 44
Length 63.5 65 66.5

*The unit is cm (centimeter)
* The indicated size is the finished size, and there may be some errors depending on the product.

How to choose size

How to wear impression from bust size inner
I want to wear tight smart +8cm T-shirt
I want to wear it as standard.
usually +12cm + Sweater/Hoodie

* Due to the riding pattern, the sleeves may feel long.
*If the material is leather, the sleeve length will be shortened by 1-2 cm.
* If you are concerned about the length of the sleeves, it is possible to shorten the sleeves for an additional fee.

SIZE S. M. L. LL 3L 4L
Weight (kg) 50~60 55~65 65~75 70~80 80~90 ~100
Height (cm) 155~170 160~175 165~180 170~185 175~190 ~190
Bust (cm) 82~90 86~94 92~100 96~104 100~108 104~112
Waist (cm) 66~78 70~82 78~86 82~90 86~94 90~98

*The indicated size is for reference only and may differ from the actual size.

What is HF Minkle?

KADOYA has been using it for many years as the official leather of the Japan Motorcycle Sports Association "MFJ official racing suit" . It has cleared the "leather inspection test" such as tensile cutting load, tearing load, and abrasion strength at a high level.

The raw leather used is domestic Holstein leather, which is characterized by its flexibility even among cowhide. Finished with full chrome tanning, it is soft and easy to adapt to the body while maintaining a firm body.

The surface is given top priority to strength, and the pigment sprayed with lacquer is applied to the dyed base.

Leather products, which play an active role as a partner to wear on a daily basis, become more attractive and attached to them the more you use them. However, when used for motorcycle riding, it is in an environment where it is easy to get dirty.

In order to prevent damage and improve the condition, it is important to take care of it on a regular basis, just like our skin. Here, we will introduce a self-maintenance method for using leather products for a long time.

(When using maintenance agents such as cleaners and oils, be sure to test in an inconspicuous area and confirm that there is no staining or discoloration before using.)

step 1

Use a horsehair brush to remove dirt and dust from the surface of the leather. Don't forget to brush the seams as well. If the stain is severe, wipe the leather surface with a wet towel that has been tightly wrung out.

step 2

Remove the Ref / LEATHER CLEANER through the cloth (cloth) until your fingers are slightly damp. When the cleaner dries, apply an appropriate amount to the cloth again.

step 3

Wipe the entire leather in several batches. By doing this work, you can get closer to the state of no makeup on your skin. Dirt and color are transferred to the cloth, but this is proof that the old oil and dirt that has migrated have been removed.

step 4

The finish is divided into matte finish, natural finish, and glossy finish depending on the oil characteristics, so please choose the oil you like.

step 5

Apply the oil of your choice to the clean side of the cloth. Take small amounts of oil.

step 6

Apply the oil while spreading it thinly so that it fits the entire leather. If you don't have enough oil, add little by little.

Step 7

Brush the entire leather with a horsehair brush to absorb the nutrients of the oil. For large areas, it is efficient to use a large brush. At that time, we recommend using a brush different from the dust remover.

Step 8

From here, I would like to recommend "one effort" for those who want to be more particular about finishing. Wipe the whole with the mouton side of the mouton glove. By wiping with a dry cloth, excess oil remaining on the surface is removed to prevent stickiness.

step 9

Finally, wipe the whole with the suede side of the mouton glove. Polishing the leather on the suede side gives it a high-quality luster. By using the finished mouton gloves, the oil will blend in and the taste will increase, and you can enjoy aging.

We offer a leather cleaning service called Refleather.

What is a refresher?

It is a new common sense to wash and wear leather products.

In Japan, dry cleaning using chlorinated solvents has been the main method of cleaning leather products.

While this removes dirt, there are also cases where the color fades and the oil of the leather is removed. I had a problem.

Refleather uses a special soap for leather, which can be washed with water in addition to being dry. The important thing here is to remove the dirt and supplement the nutrients including the lost fat. As a result, the suppleness and elasticity are restored, and you should be able to feel the gentleness and strength that the original leather had.

All leather products (genuine leather) such as leather jackets, leather jumpsuits, pants, coats, skirts, and boots can be washed. It is also possible to clean color scheme models that were avoided in conventional cleaning.

Click here for details

Founded in 1935, in Asakusa, Tokyo, we have continuously nurtured our craftsmanship in making leather jackets.

This commitment is our proud philosophy that plays a part in Japanese manufacturing. The origin of HEAD FACTORY is the "skill" and "enthusiasm" cultivated by Kadoya craftsmen.

And this is my thoughts to all those who love leather jackets and motorcycles. We continue to create clothes that can be worn for generations without being swept away by the times.


Embracing the craftsmen's passion in the brand tag, Kadoya's path to "better manufacturing"

the night before

Kadoya's craftsmen, who have been making leather jackets for a long time as a made-to-order leather shop, have accumulated technology that can respond to all needs over time.

As the world entered an era of mass production and mass consumption, the trend shifted toward ready-made clothes. In the midst of turbulent times, the skilled craftsmen led by Masataka Fukano, the second generation of the company, continued the custom-made production, while behind the scenes the development of ready-made clothes also started.

In 2003, the domestic brand "HEAD FACTORY", which was particular about "sewing one piece per person" as if going against the times, was transposed to the production of ready-made clothes. It was launched at the factory in the head office building in Asakusa.

Product variation

Compatible protector


maintenance goods




Recently Viewed Products