Let me talk about boots-in processing that is common in custom repairs.
What is boots-in explained here?
Please let me say "tuck the hem of the pants into the boot".
First of all, a certain amount of yutori is necessary to insert the hem around the tube of the boot.
If the yutori is big, it may be OK without processing the pants,
For boots that don't have much yutori, a drastic custom is required.
This time, we will assume that you have customized pants to match our RD boots.
Since the hem of the pants must be neatly stored in the narrow boots,
It is better to have perfect eyes near the ankle.
Ankle measurements plus 1 inch (approximately 2.5 cm) are the most common measurements.
The length is enough for the position above the ankle when sitting, so cut it.
The ankle area will be tight, so you will need a zipper at the hem.
Due to the structure of the human body, the position of the zipper should be between the ankle and the Achilles tendon.
If your boots have zippers, make sure the zippers are not close together.
You can choose inside or outside.
Since the area around the ankle is pressed by boots,
We recommend coil zips that are thinner than metal and have fewer edges.
Also, the end that covers the fastener (hide the worm),
I want to minimize the wind blemish between the zip and the skin,
We recommend the uncut specifications that take advantage of the characteristics of leather.
I have just given you an example above.
Pants to wear, boots, how to show, etc.
Since it varies from case to case,
If you have any requests, please contact the nearest retail store.